Fire Doors and Screens
The various profiles and properties can be viewed below. Please feel free to contact us for any further information you may require.
Jansen Economy 60
Jansen Economy 50
Janisol 3
Janisol C4
Janisol 2
-
Jansen Economy 60
For large smoke and fire resistant doors and closers up to E120 (120 mins integrity only) to BS 476: part 22: 1987. This specially developed and reinforced profile series supplements the Jansen Economy 50 systems for all large and heavy door installations without affecting the narrow face widths. The Jansen Economy 60 system can be used to create particularly robust and solid single and double leaf door units. Various types of glass can be used up to 39mm in thickness. -
Jansen Economy 50
For flush smoke and fire resistant doors and screens up to E120 (120 mins integrity only) to BS476: part 22: 1987. A profile system for flush single and double leafed E30 doors, with or without side-lights and top lights, as well as for partition walls. Section depth for door frames and leaves is 50mm. An attractive feature of this construction is the use of flush doors with a rebate running all round, both inside and out. The double rebate seal is flame retardant. The sill may have an automatic drop seal or a brushstrip and a pressed steel threshold. Various types of glass can be used up to 29mm in thickness. -
Janisol 3
Fire resistant doors and fixed lights with an elegant light weight appearance EI60 (60 mins Integrity & Insulation) to BS476: part 22: 1987. This advanced series designed for fire resistant applications is based on the tried and tested Janisol 2 profile system, and has a section depth of only 60mm. Profile stability is excellent thanks to the high quality insulating cores and mechanically undercut bond. The narrow visible width of the profiles for frames, mullions and transoms enables the construction of elegant filigree-fine EI60 glazed walls and doors. In appearance, the Janisol 3 profiles are identical with the Janisol 2 profiles. Various products of glass are available for glazing up to 39mm in thickness. -
Janisol C4
The thermally insulated steel profile series for elegant doors and glass walls EI90 (90 mins Integrity & Insulation) to BS476: part 22: 1987. With this complete profile system including fittings and accessories, one and two-leaf flush mounted doors, fire protection glazing, and doors in glass walls can be efficiently and reliably made. With an installation depth of only 70mm, the profiles achieve resistance times of more than 90 minutes according to EN 1634 due to the new, intelligent fire retardent filling. Janisol C4 doors feature double rebate seals. Fittings, locks and accessories can be integrated into the profile in an uncomplicated way. The appearance of the Janisol C4 doors is virtually congruent with the rest of the Jansen fire resistant systems. -
Janisol 2
The series of steel profiled sections with thermal break designed for smart looking doors and glass partitions EI30 (30 mins Integrity & Insulation) to BS476: part 22: 1987. A complete system of profiled sections with fittings and accessories to match, for surface flush single and double leafed doors, fire proof glazed partitions and doors in glazed walls. The section depth for door frames is 60mm. Profiles 25mm and 50mm wide can be used as mullions and transoms. Janisol 2 doors are fitted with double rebate seals that are flame retardant. Locks and other fittings can be mounted simply and easily in the hollow part of the sections. The sill may have either an automatic drop seal, or a brush strip and pressed steel threshold. Various products of glass are available for glazing up to 39mm in thickness. The appearance of the Janisol 2 doors is identical to that of the Economy 60 doors.